Categories

False alarms and system glitches can be aggravating, and even more concerning, may prevent your security system from working the way it should. Fortunately, most problems, from false alarms to dead batteries, are easy to remedy. Explore our recommendations for troubleshooting your home alarm system in Lawrence. We’ll help you keep your household safeguarded and your system operating smoothly.

Test Your Home Security System In Lawrence

One great way to troubleshoot your property’s security is to test it! Modern systems allow you to put them in test mode to keep you from triggering an emergency call. Once you’re in test mode, take these steps:

• Activate your system as you normally would when leaving.
• Open a window or door that uses a contact sensor, or test other equipment. Close the door or window so it doesn’t prompt the alarm when you leave test mode.
• Permit the alarm to sound for 60 seconds to ensure communications with the security company and to make an entry in the alarm system log.
• Continue testing equipment as needed
• Check the systems’s activity log to validate functionality.

Don’t worry, monitoring specialists will know that your system is undergoing a test. Be sure to switch out of test mode when done. It’s a good idea to test every other month or anytime you change your home’s phone or internet provider.

Check The Positioning And Condition Of Motion Detectors

Although an essential element of your alarm system, motion detectors are well known for false alarms. Prevent them with a few simple troubleshooting steps.

• Do a physical inspection. Are there items that could move within the path of the sensor, like a window treatment blown in a breeze?
• Is the sensor covered in dust? Grime, dirt, and cobwebs can lead to malfunctions. Make sure the face is clean.
• Does the motion detector offer pet immunity you can turn on? Some can be configured to disregard pets up to 100 pounds.
• When was the battery last replaced? A nearly depleted battery can affect performance or cause false alarms.
• Is a heat source affecting the sensor? Excessive heat from direct sun or a fireplace can cause an alarm.

Keep Batteries On Hand And Pay Attention To Low Battery Notifications

One helpful perk of modern home security systems is that they’ll alert you when batteries are dying. If your system is equipped with a smartphone app or control panel, you’ll often see alerts there. Depending on your system, you may hear an intermittent beep when batteries are low. 

Motion detectors, smoke detectors, contact sensors, and other wireless tools have batteries that should be replaced every year or two. It’s a good idea to keep batteries on hand and establish a replacement schedule. Top systems also include a backup battery for the main control panel. This battery helps keep your system running if you have a power outage and should recharge once the electricity is working again. If it fails to recharge, you should replace it.

Troubleshooting Is Effortless With ADT Home Security In Lawrence 

As the top name in home security, ADT builds systems that provide superior protection and functionality. Getting into test mode is simple through the ADT+ app or MyADT.com, and you’ll always get updates when a sensor battery is low. Contact Secure24 Alarm Systems, an authorized ADT dealer, to find out more and design a system ideal for your Lawrence home. Place a call to (785) 268-2728 or complete our form today!