ADT® Authorized Dealer Serving Lawrence & Surrounding Areas
close up of a lady adjusting the security panel
March 01, 2022

How To Reset Your Lawrence System

A nice benefit of having your home security system hooked up by trained experts is that you rarely have to make major adjustments to it. However, there may be a couple situations where you need to reset your alarms in Lawrence. If you use a smart command hub, a reset typically takes a couple tap of a button following occurrences like battery changes, power outages, and false alarms.

Consult Your Owner’s Manual Before Attempting An Alarm Reset

A word to the wise before you try to reset your Lawrence home security system, read your instruction manual first. You’ll never want to damage your property’s defense as a result of touching something incorrectly. In addition, your system might have changed if you upgraded from a number pad to a digital command hub. And if you can't reset your system, don't hesitate to call the professionals.

Resetting Your Lawrence Security System After A False Alarm

Usually, a false alarm happens as a result of the accidental tripping of a sensor. You are able to engage the control panel or open your ADT smartphone app and hit the shield option and enter your credentials to switch off the alarms when this occurs. You may get a call from your 24-hour monitoring specialists, but just let them know it was a false alarm.

Resetting Your Alarm Following A Power Outage In Lawrence

When you lose power from a storm or other event, you might begin hearing a steady beep from your control panel. This lets you know that your security is running off the backup battery. To reset your equipment and halt the constant chirping, you must take steps to disarm and rearm your security.

However, if power is out for an extended time, you could need a full reset of your system. Heed the directives in the manual -- typically by submitting your PIN number and hitting the off button twice -- and you should be back in business. You might keep hearing chirps from the backup power, as it may not cease until the battery charges entirely. Contact your home security agent if you are still having issues with your ADT controls at least 20 hours after power is restored.

How To Reset Your Home Security System After Replacing A Battery

Occasionally you will have to replace a battery powering one of the devices in your security installation. In order to accomplish this, you want to switch your home’s defense to Test Mode so you don't trigger a false alarm. After the new battery is put in place, change the alarm from test mode and resume your usual settings. If the control panel fails to recognize the component or the battery icon is still on, you may have to perform a whole system reset.

Resetting Your Lawrence Security System Following The Addition Or Deletion Of Someone

The addition and deletion of personal codes can be accomplished on your ADT Command interface and the ADT Control mobile app. You shouldn't have to perform a system reset after adding or removing codes. But you should note, if you relocate to a new property with an existing ADT system, you need to call your home security professional at (785) 268-2728 to establish a new service. The technician will come out and switch out outdated parts, install other alarms or cameras (if necessary), and reset the system for you.

A Well-Designed Security System Is The Right Choice

Resetting a home security system in Lawrence can be difficult if it doesn’t have clear devices and controls. If you would like to acquire your easy-to-use alarm system, dial (785) 268-2728 or complete the form below. Our specialists are ready to customize the right security system for your property.